|
Build Your Online Product Catalogs?
Product Name: |
KST DDR3 1333MHZ 2GB Memory Ram
|
Supply Ability: |
|
Related proudcts |
memory, ram, ddr, |
Specifications |
Memory Type: DDR3 |
Price Term: |
|
Port of loading: |
|
Minimum Order |
|
Unit Price: |
|
|
***ailed profile Item Name: DDR3 Ram 1333Mhz 2GB desktop computer memory modules DDR3 1333Mhz (PC3-10660) 2GB DDR3 1333Mhz (PC3-10660) 2GB 240Pins Long dimm / Desktop ram Brief description: DDR3 Ram 1333Mhz 2GB 2GB 1333MHz DDR3 Non-ECC CL9 DIMM Part No.: KVR1333D3N9/2G Full co***tibility Intel motherboard Original Chip: MT Hynix Samsung Elpida RMA rate less 1% 5 years warranty Specifications: Memory Type: DDR3 Memory Speed: 1333Mhz DDR3 Memory Size: 2GB/2048MB Memory Channels: Dual Memory Socket: LONG DIMM Memory CAS Latency: 4-4-4-12 Memory Timing:4-4-4-12 Pins:240 Voltage:1.5V Function: Non ECC Memory Chips: Hynix. Elpida. Micron. Samgsung. Infineon Package ***ail: Retail packing or bulk packing Delivery Date: 2-3 working days after buyer's payment is verified. Tested ***ails: KVR1333D3N9/2G 2GB 256M x 64-Bit PC3-10600 CL9 240-Pin DIMM DESCRIPTION: This describes ValueRAM's 256M x 64-bit 2GB (2048MB) DDR3-1333 CL9 SDRAM (Synchronous DRAM) memory module, based on sixteen 128M x 8-bit DDR3-1333 FBGA components. The SPD is programmed to JEDEC standard latency 1333Mhz timing of 9-9-9 at 1.5V. This 240-pin DIMM uses gold contact fingers and requires +1.5V. The electrical and mechanical specifications are as follows: FEATURES: JEDEC standard 1.5V ¡À 0.075V Power Supply VDDQ = 1.5V ¡À 0.075V 667MHz fCK for 1333Mb/sec/pin 8 independent internal bank Programmable CAS Latency: 5,6,7,8,9,10 Posted CAS Programmable Additive Latency: 0, CL - 2, or CL - 1 clock Programmable CAS Write Latency(CWL) = 9(DDR3-1333) 8-bit pre-fetch Burst Length: 8 (Interleave without any limit, sequential with starting address ¡°000¡± only), 4 with tCCD = 4 which does not allow seamless read or write [either on the fly using A12 or MRS] Bi-directional Differential Data Strobe Internal(self) calibration : Internal self calibration through ZQ pin (RZQ : 240 ohm ¡À 1%) On Die Termination using ODT pin Average Refresh Period 7.8us at lower then TCASE 85℃, 3.9us at 85℃ < TCASE |
Company: |
TT TECHNOLOGY LIMITED
|
Contact: |
Ms. Phoebe Kowk |
Address: |
West 4 Block SEG Technology Park,Huaqiang Road(North), Futian District |
Postcode: |
518000 |
Tel: |
86 755 33128063 |
Fax: |
86 755 33128063 |
E-mail: |
|
|
|
|